Updated:  January 2008  (Please call or email for the most up-to-date pricing.)

Conventional Kiln Controllers

Typical configurations: 

CK1160-2X Electrical Outputs  $2,276.00

CK1160-2X Pneumatic Outputs $2,839.00

CK1166-2X Electrical Outputs, Profiling $2,299.00

CK1166-2X Pneumatic Outputs, Profiling $2,862.00 

CK9300-2X Electrical Outputs $2,405.00

CK9300-2X Pneumatic Outputs $2,968.00

CK1160-2X Dual Zone Electrical Outputs $3,208.00

CK1160-2X Dual Zone Pneumatic Outputs $3,913.00 

Chart Recorders

DR5000 Chart Recorder, Add:  $748.00

MRC5000 Chart Recorder, Add:  $924.00

Proportional Heat Output Option

Add to Pneumatic price:  $315.00 

Custom configurations (including proportional vents) are available

Sensors & Supplies

Platinum 100 RTD for temperature measurement

    4" SensorTec  $50.00

    10" SensorTec   $50.00

Teflon RTD cable

    100'  $109.00

    500'  $545.00 

SS Armored

    100'  $164.00 

    500'  $820.00

PVC RTD cable

    Unshielded 100' (PETE PVC)  $30.00

    Unshielded 1000' (PETE PVC)  $165.00

    Standard 100' (PETE PVC)  $54.00

    Standard 500' (PETE PVC)  $190.00

    High Temp 100' (PVC)  $110.00

    High Temp. 500' (PVC)  $289.00 

RH Transmitter   $362.00

RH Transmitter w/power supply   $445.00

RH Trans. w/Teflon filter (w/out power supply)  $416.00

RH Transmitter w/Teflon filter  (w/power supply)  $490.00

Wet Bulb Reservoirs & Supplies

    DIVI Ent. Wet Bulb Reservoir (includes 1 WB wick/sock)  $80.00 

    Wet Bulb wicks/socks   $15/doz

Please note:  We have discontinued the manufacture of our wet bulb reservoirs. 

Spare Parts

Spare Partlow 1160 base  $255.00 

Spare Relay board for Partlow  $34.00

4-20 mA board for Partlow  $60.00

RS485 computer interface board for Partlow  $80.00

Pens for MRC Recorders (5 pk)  $21.00

Pens for FDC Recorders (5 pk)  $21.00

Charts for Partlow Recorders 0-200 (100 bx)  $19.00

Charts for Partlow Recorders  30-180 (100 bx)  $33.00

3 Way solenoid valve  $67.00

Computer Access

All hardware & software to interface up to 8 kilns  $4400.00

     Price will vary w/ software options

Labor Charges

Travel time for technicians in Mid-Atlantic states  $35/hr.

On-site service Mid-Atlantic states  $60/hr.

Travel time outside the Mid-Atlantic states per man per day + expenses  $350.00 

Service outside Mid-Atlantic states per man per day  $600.00 

Note:  Shipping & Handling charges will be added to items shipped through USPS, UPS, FedEx, etc.

Travel charges will be added for items hand delivered.

Any service and/or installation will be billed separately.

Please place orders by email, fax or phone.  See Contact for email addresses, phone & fax numbers.

If you are a new customer, we require that you fill out a credit application, which we will fax to you.

If you have any questions, please feel free to contact us.

Thank you! 

DISCLAIMER OF LIABILITY

Each Process Control Specialties, Inc. controller (and other products sold by PCSI) must be used in accordance with the manufacturer's instructions and only for the specified purpose for which it was designed. Process Control Specialties, Inc. shall not be liable for any consequential damages, injury, paralysis or death arising from any use or misuse of the products purchased from us. By making a purchase from Process Control Specialties, Inc. you (the customer) and your heirs assume all responsibility of ownership, risks of use and agree to defend and hold harmless Process Control Specialties, Inc., its owners and heirs for any incident or action involving products purchased.